Rapid-setting mortar for local water ingress
This chloride-free cement-based plugging mortar starts setting when mixed with water and expands slightly during hardening. It is intended for local seepage and water ingress in basements, shafts and similar structures, including locations with water pressure.
Technical overview
The selected grade has a temperature-dependent working time of approximately 1–2 minutes. Indicative consumption is about 2 kg per litre of void. It is supplied in 20 kg containers. Substrate and material temperatures should be at least +5°C. Confirm the current technical and safety data sheets before use.
Where it fits in the waterproofing system
Plugging mortar is rigid. The area being sealed must be sound, clean and free of movement; later cracking or movement can cause leakage. A local plug may need a surrounding surface treatment. Compare cementitious waterproofing slurry and review basement waterproofing system selection.
Can this replace full basement waterproofing?
A local repair addresses a specific leakage point. Describe the wider moisture pattern in your enquiry so that the project can be considered as a whole.
Request a product quotation
Send photographs, the location of the leak, approximate void dimensions, water conditions, project country and quantity required. Tell us whether the work is urgent and whether an installer has already assessed the area. We will use this information to discuss the proposed product and supply requirements.
Request technical information & a quotation